Company News

Home > News > Content
What Are The Precautions For Using The Air-operated Automatic Locking PCB Screw Machine?
Nov 09, 2018

Blowing type automatic lock screw machine use precautions

The appearance of the automatic locking screw machine improves the locking efficiency of the screw, especially the efficiency of the blow-type automatic locking screw machine. So what should we pay attention to when using the air-blowing automatic locking screw machine? Is it the most convenient? Reliable solution, let's take a look at the precautions for the use of the blown automatic lock screw machine!

1. The screws used should be less foreign matter, mixed materials, and flower head defects, otherwise the machine operation will not be smooth.

2, the selected screws should be commonly used, a large number, a small variety, in order to improve the efficiency of the active screw machine.

3. It should be adhered to the smooth sliding of the electric batch lock on the electric batch sliding sleeve, otherwise the screw will not easily enter the electric batch lock mouth, which affects the use of the active lock screw machine.

4. The position of the lock screw should be as uniform as possible to avoid different depths, uneven appearance and narrow space.

5, can not bend the screw delivery tube, otherwise the screw will be stuck in the bend during the screw conveying process.

6. It is necessary to wait for the electric batch to reach the set torque, and then the electric batch will take the initiative to suspend the electric batch.

7. If it is found that the active locking screw machine does not send a screw to the electric batch lock to be locked, you can repeat it (press the screwdriver and the electric batch to roll), let the machine send a screw to the electric batch lock to be locked.

8. The air pressure is not adjusted too much, otherwise it will only speed up the wear of the nose of the electric batch, and the screw will sometimes directly rush out of the lock.

9, the track vibration force can not be adjusted too much, otherwise the screw is easy to extrude the track on the screw track, affecting the stability of the active locking screw machine.




Copyright © Shenzhen SMTfly Electronic Equipment Manufactory Ltd. All Rights Reserved.Tel: +86-755-33581320