Knowledge

Home > Knowledge > Content
How should the glue machine be maintained?
Mar 13, 2018

The daily maintenance of the glue dispenser directly affects the service life of the glue dispenser. The daily work of dispenser maintenance has great influence on the service life of dispensing machine, including the smoothness in the usual use process. The following is the routine maintenance steps of dispenser.

1. Replace the glue. We need to clean the pipe. At this time, the feed valve is first closed, the discharge valve is opened, the remaining rubber material of the rubber bucket is discharged, the valve is closed, the feed valve is opened, the cleaning solvent is poured into the storage bucket, and the body is activated, and the solvent is pressed out and washed according to the usual operation mode.

2, the air pressure intake is not normal and the gas is found. Please remove or check the gas pressure in the pressure regulating filter. In the extensive use of glue dispensing machine, please small trial, master the skills, the product in order to avoid error, when the test is no problem, then the double liquid dispenser or double liquid glue machine for mass production; the vacuum defoaming glue on vacuum system, to eliminate the agitation produced in the process of bubble, or set aside for 10-20 minutes before use, so that when mixed bubbles removed in time, the greater the amount of the mixture.

3. Please clean the machine part regularly to increase the service life. The more the amount of glue mixed together, the quicker the reaction is, the faster the curing speed will be. Therefore, it is necessary to rationally distribute the glue according to the actual production, otherwise, it will cause the waste of glue. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various fields of modern industry.

4. The power supply should be removed when the machine is discontinued for a long time. This will not only prolong the life of the machine, but also save a lot of electricity. With the rapid development of industry, liquid control technology and dispensing equipment are developing to ultra high precision control, diversification and specialization.

Note: each time after use to clean, can be seen everywhere, wipe with alcohol, regular exercise, the best part of the point of oil or butter, maintain lubrication, if not a long time to put glue solidified in LED lighting, or dispensing machine, and money to clear, very troublesome.








Copyright © Shenzhen SMTfly Electronic Equipment Manufactory Ltd. All Rights Reserved.Tel: +86-755-33581320