Full Automatic SMT Nozzle Cleaner Equipment

The Features of Automatic SMT Nozzle Cleaning Machine: A one-time into the 36 nozzle, please wash large; Completely solve the dirt is difficult to clean the dirt impurities; Though the smaller nozzle aperture but cleaning is clean; Cleaning more thoroughly directly extend the life of the nozzle;...
Product description

The Features of Automatic SMT Nozzle Cleaning Machine:

A one-time into the 36 nozzle, please wash large;

Completely solve the dirt is difficult to clean the dirt impurities;

Though the smaller nozzle aperture but cleaning is clean;

Cleaning more thoroughly directly extend the life of the nozzle;

No damage to the surface of the nozzle coating, reflective plate;

Use environmentally friendly deionized water or distilled water to clean;

Automatic continuous cleaning, automatic drying;

Operation is more simple and convenient;

Increased intelligent water storage check function

Applicable to all kinds of placement machine.


Full Automatic SMT Nozzle Cleaner Equipment Economic Benefits:
① Reduce the purchase cost of the nozzle;
Use SMTfly-36 washing machine can be a good solution to the nozzle dirty and scrapped, so as to extend the service life.
② Reduce unnecessary labor;
As the machine uses automatic cleaning, so no special person responsible for all the machine automatically completed the entire process.
③ Effectively reduce the product defect rate, improve SMT productivity;
A large part of the production process is due to the dirty surface of the nozzle and the cavity is too dirty caused by throwing or placement of displacement, resulting in poor order after welding. After using the washing machine can make the nozzle always protect the new state, greatly improve the production efficiency.


Cleaning Effect of Nozzle Washing Machine in SMT Line:
Cleaning effect A

image001.jpg


Cleaning effect B

image003.jpg


Introduction and Use of the Machine :

1: Composition Introduction:

1.1:mechanical :All the key parts of the whole use of imported 304 stainless steel, special parts of the use of imported 316 stainless steel to

The warranty machine will not rust due to the use of water, thus affecting the equipment life and other security risks;

1.2:pneumatic : The use of all imports of SMC pneumatic components, to better ensure a stable and efficient work efficiency;

1.3:control : The machine adopts high quality touch screen man - machine interface, PLC control;

2: Precautions:

2.1:Do not open the water cover in the ventilation cleaning or drying. If there is a high pressure in the storage tank,Mouth jet out.

2.2:Please use distilled water or industrial deionized water, do not use mineral water or tap water, such water contains minerals and bleach, the nozzle will cause damage and damage;

2.3:After each cleaning is completed using air guns to dry the residue in the studio;

2.4:After each time you place the nozzle, make sure that the nozzle is fully seated and the nozzle is fit with the fixture.

2.5:Place the tool into the studio when the carousel should be careful not to hit the telescopic cylinder nozzle, If not very strong collision does not affect the nozzle and the concentricity of the device. Sprinkler and appliance concentricity The factory is positioned by positioning the sensor. Such as strong collision lead to concentricity are not allowed to contact with the after-sales maintenance staff in a timely manner;      

2.6:Regularly replace the equipment intake filter every year, The general replacement of the filter time for a year, depending on the factory gas source clean to determine, such as filter filter yellow or black need to immediately replace;


The Advantages of Our High Speed Nozzle Cleaning Machine :

1. We supply a wide range of products and provide one-stop service for Electronic Assembly Industry.
2. We can also customize the products to fulfill different requirements.
3. We are a leading manufacturer of ESD Products, Cleanroom Products, Tools & Instruments for Electronic Assembly Industry.
4. We keep a lot of stock for regular products and we can support small orders. Usually, our lead time is just 7 days.
5. Credibility: We are the 6th year Alibaba Gold Supplier. Our customers are located all over the world.
6. Gratitude: We cherish and feel grateful to every customer for the business you give us. We are your reliable partner and will return to you with good products and good support.
7. Professional: We have been in this business for more than 10 years. We have a strong professional team with various experiences.
8. We keep doing new product development. Our goal is to enhance our competitive capacity constantly.
9. Promise: we are always ready to shoulder the responsibility if any loss caused to our customer due to our mistakes
10.Price: we always offer competitive prices and help our customers to cost down.
11.Quality: we do 100% inspection before the shipment.

 

he Visiting of Our Customers:

image005.jpg


CE Certification:

image007.jpg

Hot Tags: full automatic SMT nozzle cleaner equipment, China, suppliers, factory, wholesale, customized, buy, discount, price, made in China
Related Products
Feedback

Copyright © Shenzhen SMTfly Electronic Equipment Manufactory Ltd. All Rights Reserved.Tel: +86-755-33581320