Product Categories
Contact Us
Shenzhen SMTfly Electronic Equipment Manufactory Ltd
Mobile:+0086-1353-7348-526
Add: Building 2, Gang Hua Xing Industrial Park, Chongqing Road, Fuyong Town, Shenzhen, China
Email:s2@smtfly.com
SMT Fixture Cleaning Machine
SMTfly-5100 is my company independent research and development, production of high-precision cleaning equipment, mainly for SMT furnace governance, back to the furnace condenser, filter, wave soldering chain, jaws and other regular cleaning; the current large customers are: Quanta Computer, Wistron Capital, China-computer, Brazil Xierkang, Panasonic electronic parts and so on.
Fixture Cleaning Machine in SMT Industry Advantages of Cleaning the Rule:
1.One-touch operation,no need to special cleaning staff
2.Batch cleaing,cleaning fast and efficient
3.No electricity ,all pneumatic cleaning,100% safe
4.Up and down, around the full range of cleaning,cleaning thoroughly,high cleanliness
5.Suitable for a variety of cleaing fluid
6.Automatic cleaning,saving labor
7.The solution is repeated several times
8.Spray cleaning,governance with a condenser intact
Cleaning Machine and Artificial / Ultrasonic Cleaning Fixture Comparison:
Condenser cleaning | Manual or ultrasonic cleaning | Comparing results |
Automatic cleaning,100% safe | Charged cleaning or artificial iron brush cleaning+solution,poor safety | ≥ |
Batch cleaning,fast and efficient | Cleaning time is long,low efficiency | ≥ |
One-touch operation,no need to special cleaning staff | Iron brush fixture,dirty,tired,need special cleaning personal | ≥ |
Up and down,around the full range of cleaning,cleaning thoroughly,high cleanliness | Condenser on the dead ends,the surface dirty cleaning difficult | ≥ |
Solution cycle repeated repeated use | High Cleaning costs | ≥ |
Spay cleaning and rinsing,governance well intact | Iron brush cleaning will be raised,the surface off the phenomenon,the impact of follow-up product quality | ≥ |
Cleaning +rinse+dry,after cleaning the surface without solvent | No rinse,after cleaning solvent residue,after the use of heat when the smell out after the smell out | ≥ |
Specifications of Fixture Cleaning Machine :
Cleaning basket size | 1000*200(H)mm Special size need to be customized |
Cleaning fluid capacity | 80L(Max) |
Rinse fluid capacity | 80L(Max) |
Cleaning method | Spray rotary cleaning and rinsing |
Dry way | Compressed air dry |
Recommended cleaning time | 3-15mins |
Recommended rinse time | 1-2mins |
Recommended drying time | 3-6mins |
Cleaning filter | Using 3-level filtration |
Class 1 filter | 2mm(Filter debris) |
Class 2,3 filters | 100um/20um(Filter flux, rosin and so on) |
Blower | 3.7KW Heated to 80° |
Diaphragm pump | 1 inch diaphragm pump (pumping, drainage) |
Air supply | 0.5Mpa~ 0.7Mpa,600-800L/min |
Air consumption | 800-1000L/min |
Outlet size | Φ130mm(W)×60mm(H) |
Dimension | 1550(L) ×1780mm(W) ×1730mm(H) |
Recommended cleaning and drying time | 2-3mins |
The Description of SMT Jig Cleaner:
1.Cleaning Basket
Place the fixture to be cleaned, the condenser, etc., the machine automatically rotates when working, 1m diameter cleaning basket, can be achieved batch cleaning
2.Pump Cleaning pump / rinsing pump / piping system
3.Control System
Pneumatic control systems and circuits ensure that the machine is set up by system
4. Liquid tank Cleaning tank / rinse tank
Separate the cleaning solvent and rinse liquid, separate the piping system, so that the cleaning fluid is always in the cleaning tank and cleaning pipe; rinse liquid in the rinse tank and rinse pipe, can be used for a long time without mixing
Fixture Washing Machine Reflow Condenser Before and After Comparison:
Our Clients: